eKretz
Diamond; Mod Squad
- Joined
- Mar 27, 2005
- Location
- Northwest Indiana, USA
Probably the best way would be to make some form of specialized comparator measuring fixture. Something like a small slide with short sections of dowel mounted to register on the face and taper at the same time, and an indicator to read the slide distance.
If I was doing production that's what I'd do. For one or two parts where I have the mating pieces, I'd probably get the angle right on with a test fit/bluing rub then fit to the face so there's .001"ish gap or so when pushed on by hand. Easy enough for a couple parts.
If I was doing production that's what I'd do. For one or two parts where I have the mating pieces, I'd probably get the angle right on with a test fit/bluing rub then fit to the face so there's .001"ish gap or so when pushed on by hand. Easy enough for a couple parts.
