SeymourDumore
Diamond
- Joined
- Aug 2, 2005
- Location
- CT
Guys, I am looking for the following:
ER16 collet chuck
Straight Shank - 1" diameter
standard nut
I cannot use the mininut!!!, and that is the only thing I've found available from all usual suspects, including the questionable brands.
There are 3/4 from Rego and Nikken ( probably Techniks as well ), but I'd like to not have to use a bushing.
This is on a lathe with 1" ID holders.
Thank You
ER16 collet chuck
Straight Shank - 1" diameter
standard nut
I cannot use the mininut!!!, and that is the only thing I've found available from all usual suspects, including the questionable brands.
There are 3/4 from Rego and Nikken ( probably Techniks as well ), but I'd like to not have to use a bushing.
This is on a lathe with 1" ID holders.
Thank You