What's new
What's new

F/S Hardinge DV-59 Turret Lathe

JoshLapin

Plastic
Joined
Nov 30, 2013
Location
Rosebud, MO
Hello All,

I have a 1965 Hardinge DV 59 Turret Lathe I would like to see out of my shop...

Machine is located in Rosebud, MO. It is under power and i use a rotary phase converter to power it. The machine has new belts. and includes the 5c collet closing chuck. The cross slide is in the picture just not mounted to the lathe.

The Coolant pump is not wired up so i can not say if it works or not. The coolant nozzle is present but did break when the machine was originally shipped to me.

The speed adjustment housing was also bent in that shipment and the speed indicator no longer functions. The buttons adjust the speed fine (just cant visually confirm the RPM range)

I am asking $1000 OBO for the lathe and everything in the pictures.

This machine is heavy...I have a farm tractor on site and can help lift onto a low trailer if needed. Id prefer the machine to be personally picked up.

IMG-5198.jpg

IMG-5199.jpg

IMG-5200.jpg

IMG-5201.jpg

IMG-5194.jpg

IMG-5195.jpg

IMG-5197.jpg
 
Last edited:








 
Back
Top