garychipmaker
Cast Iron
- Joined
- Dec 2, 2005
- Location
- ia
Hi I,m still learning this 1998 Fadal 4020 My problem is it stops @ line N50 Here's the code
N5 018 RAISED
N10 Tool Call
N15 G0 G17 G40 G80 G90 M5 M9
N20 T4M6 (.25EM
N25 D4 H4 E2
N30 X-.6 Y-1. S4000 M3
N35 G1 F10 X-.25
N40 Z-1.0
N45 G41 X-.125
N50 Y1.75
N55 X.25
N60 Y-1.5
N65 M30
@N50 spindle and travels stop. Table is at Y 1.875
Graphing stops also If I remove the G41 in N45 it will finish the code
I'm stumped As always thanks for the help
N5 018 RAISED
N10 Tool Call
N15 G0 G17 G40 G80 G90 M5 M9
N20 T4M6 (.25EM
N25 D4 H4 E2
N30 X-.6 Y-1. S4000 M3
N35 G1 F10 X-.25
N40 Z-1.0
N45 G41 X-.125
N50 Y1.75
N55 X.25
N60 Y-1.5
N65 M30
@N50 spindle and travels stop. Table is at Y 1.875
Graphing stops also If I remove the G41 in N45 it will finish the code
I'm stumped As always thanks for the help