What's new
What's new

FS: 1.5" and 2" boring bar sleeves and morse taper drill holders

mattthemuppet

Stainless
Joined
Apr 22, 2016
Location
San Antonio
1.5" sleeves, assorted sizes, $50+ shipping for each lot. There a few smaller sleeves/ holders in each lot - please see the pics.

Lot #1, holder on far right is mt2
IMG20231203173947.jpg
IMG20231203173951.jpgIMG20231203173955.jpgIMG20231203173958.jpg

Lot #2, holder second from right top row is mt1
IMG20231203174008.jpgIMG20231203174012.jpgIMG20231203174015.jpgIMG20231203174022.jpg
 
Last edited:
2" od sleeves, $5 each
IMG20231203174030.jpg
1/2"
IMG20231203174038.jpg
5/8"
IMG20231203174052.jpg
3/4"
IMG20231203174110.jpg
1"
IMG20231203174114.jpg1-1/4"
IMG20231203174129.jpg
1-1/2 and 1-3/4"
IMG20231203174146.jpg
Morse taper 1, 2, 3 and 4
 

Attachments

  • IMG20231203191611.jpg
    IMG20231203191611.jpg
    4.1 MB · Views: 0
  • IMG20231203191616.jpg
    IMG20231203191616.jpg
    4 MB · Views: 0
  • IMG20231203191636.jpg
    IMG20231203191636.jpg
    4.2 MB · Views: 0
Last edited:
Some smaller holders
IMG20231203173841.jpg
Sandvik 132L-1610050 10mm $10
IMG20231203173854.jpg
Sandvik Coromant CXS-A1000-04M 4mm. I think there's a piece of broken off tool down the bore (hard to see) but it shouldn't be too difficult to get out. $10
IMG20231203173922.jpg
Collis 85221 3/8" id $5
IMG20231203173935.jpg
 
Well that's a new one - one of the sleeves in lot #2 appears to be an r8 adapter. The one bit of r8 tooling I have seems to fit just fine.
IMG20231203214230.jpgIMG20231203214235.jpg
There's also an mt3 adapter in lot #2 as well!
 
Heading back to Texas for around a month starting Saturday, so if you're interested in any of this stuff I'll need to get it on its way before then. Or I'll bump it when I get back say the end of January :)
 








 
Back
Top