What's new
What's new

FS : 2008 Hardinge GS200/66 C-axis lathe

matthewlee

Hot Rolled
Joined
Jan 7, 2012
Location
st louis
Losing my work space shortly and am downsizing a few pieces of equipment.

This is one of them.

I bought this from a small 3 man shop in NY. They bought it new and upgraded to a Y-axis Haas.
I run a one man shop so this doesn't get much use or pushed hard since I program conservative so I can run other machines and not have to worry about it.
No issues
Well maintained
Runs great and holds repeatable tight tolerance.
Fanuc oi-tc control
Rs 232
Doesn't show many hrs see pic
Two speed A2-6 spindle
66mm thru
12 position vdi40 live tooling turret
3 radial live tools
2 axial live tools
Programmable mt5 tailstock with quill
Freshly rebuilt Royal quad bearing MT5 live center
Chip conveyor
Parts catcher/conveyor
Foot pedal operated chuck and tailstock/quill
Mist collector
Lots of tooling for the turret, see pics
16c spindle nose
Schunk quick change 8" chuck. (Badass and expensive. Can change jaws in about 1 minute)
Also the 8" tong fu chuck that came with the machine
The S30 collet nose shown is not included
I have full set of manuals
Spindle liners
Spare hydraulic pump
Google the machine and you can find more specs
Asking $35k
 

Attachments

  • IMG_20210804_144952.jpg
    IMG_20210804_144952.jpg
    90.5 KB · Views: 207
  • IMG_20210804_145001.jpg
    IMG_20210804_145001.jpg
    87.6 KB · Views: 195
  • IMG_20210804_144942.jpg
    IMG_20210804_144942.jpg
    88.9 KB · Views: 178
More words
 

Attachments

  • IMG_20210804_144838.jpg
    IMG_20210804_144838.jpg
    87.1 KB · Views: 78
  • IMG_20210804_145051.jpg
    IMG_20210804_145051.jpg
    84.8 KB · Views: 92
  • IMG_20210804_145115.jpg
    IMG_20210804_145115.jpg
    87.4 KB · Views: 88
  • IMG_20210804_145152.jpg
    IMG_20210804_145152.jpg
    92.8 KB · Views: 82
No sir
Bar feed goes on the opposite end (left side when standing at the control)
What you see in the chip conveyor pic is another Hardinge lathe and blue chip conveyor I have.

If you need a bar feed.. I do have one available that is mated to a third Hardinge 8/52 lathe I have.

Hope this helps.
 








 
Back
Top