zSwiss
Aluminum
- Joined
- Jan 28, 2022
New Year cleaning under way. Everything is in the Denver area for local pick up or inspection, shipping not included but via smallest USPS flat rate box items will fit in.
Cash is king, Venmo will also work. Think I priced everything decent, but am open to offers on everything except the Horn tooling and inserts.
Starrett 2-3 Mic, as pictured, box has seen some better days but mic is smooth - $30
Starrett 1-2 Mic purchased new and used a hand full of times, ended up with another one - $40
Starrett 0-1 Mic's purchased new, one is "crunchy" and needs to be taken apart and cleaned - $40/ea
Starrett 0-1 Mic just do not need. No box or accessories - $25
Scherr Tumico Mic, gummy but turns, oiled it and still gummy -$10 Sold to rawen2
Starrett 1 1/2 to 12 ID Mic - $100
8mm Bimu Lathe Tool - $10
1/2 Unknown brand GHDR - $10
1/2 Mitsubishi CTAHR-082 tool pocket looks good, but opposing side does not - $40/ea
1/2 Mitsubishi CTBHR-082 shortened - $30
1/2 Kennametal SVJBRF-082D shortened - $20
1/2 Mitsubishi SDJC shortened - $20
1/2 Valentite SD-TMR-8-3 - $20
5/8 New Sandvik SDPCN - $50
5/8 Kendex / Kennametal ? - $20
5/8 Manchester 206-169 - $20
3/4 Hertel 1-38020R021Z SPAB0 114 111 new or near new - $50
3/4 Hertel 1-38020L021Z SPAB0 114 111 new or near new - $50
3/4 Unknown NSR-123A - $10
Box of Hertel inserts for above holders, 9 in box, 10th is in the one holder - $40
YG P15Z01 .437 - .500 Insert Drill Body new - $75
Allied 1.25 - 1.75 Insert Drill Body used but not abused - $120
Allied 1.75 Insert used - $40 (sold with body only)
Iscar Self-Grip SGIH 26-2 used - $70
Inserts for above, 2 used 2 appear new - $30 (sold with holder only)
Unknown MFG Part Blade in 1" holder - $50
Hertel (8) and Iscar (6) inserts for above - $50 (sold with holder only)
3x Part off Blades used - $20
Small shank (various sizes) brazed carbide lot (13 pieces) - $30
1/2 Shank brazed carbide lot (8 pieces) - $25
HSS lot varous sizes (20 pieces) -$40 SPF to Ecarter
Chi-NA Parallel Set think it is an SPI set but no markings, some used, some new in near new condition - $125
Large CC Craley Boring head, shank turned down to 3/4 but still some 1" left - $40
Small CC Craley Boring head, shank turned down to 3/4 but still some 1" left - $30
Shop made? small fly cutter - $10
Lot of center drills -$50 for all Sold to Mud
Injection Molding Tooling 3/4 Radius - $50 for both
Various Letter and Number punches -$60 for all Sold to Mud
SPI Sine Bar Kit, used some light surface rust -$80 SPF to Ecarter
4x Bimba 0912-DH used but appear functional - $30/ea or all for $100
Cash is king, Venmo will also work. Think I priced everything decent, but am open to offers on everything except the Horn tooling and inserts.
Starrett 2-3 Mic, as pictured, box has seen some better days but mic is smooth - $30
Starrett 1-2 Mic purchased new and used a hand full of times, ended up with another one - $40
Starrett 0-1 Mic's purchased new, one is "crunchy" and needs to be taken apart and cleaned - $40/ea
Starrett 0-1 Mic just do not need. No box or accessories - $25
Scherr Tumico Mic, gummy but turns, oiled it and still gummy -
Starrett 1 1/2 to 12 ID Mic - $100
8mm Bimu Lathe Tool - $10
1/2 Unknown brand GHDR - $10
1/2 Mitsubishi CTAHR-082 tool pocket looks good, but opposing side does not - $40/ea
1/2 Mitsubishi CTBHR-082 shortened - $30
1/2 Kennametal SVJBRF-082D shortened - $20
1/2 Mitsubishi SDJC shortened - $20
1/2 Valentite SD-TMR-8-3 - $20
5/8 New Sandvik SDPCN - $50
5/8 Kendex / Kennametal ? - $20
5/8 Manchester 206-169 - $20
3/4 Hertel 1-38020R021Z SPAB0 114 111 new or near new - $50
3/4 Hertel 1-38020L021Z SPAB0 114 111 new or near new - $50
3/4 Unknown NSR-123A - $10
Box of Hertel inserts for above holders, 9 in box, 10th is in the one holder - $40
YG P15Z01 .437 - .500 Insert Drill Body new - $75
Allied 1.25 - 1.75 Insert Drill Body used but not abused - $120
Allied 1.75 Insert used - $40 (sold with body only)
Iscar Self-Grip SGIH 26-2 used - $70
Inserts for above, 2 used 2 appear new - $30 (sold with holder only)
Unknown MFG Part Blade in 1" holder - $50
Hertel (8) and Iscar (6) inserts for above - $50 (sold with holder only)
3x Part off Blades used - $20
Small shank (various sizes) brazed carbide lot (13 pieces) - $30
1/2 Shank brazed carbide lot (8 pieces) - $25
HSS lot varous sizes (20 pieces) -
Chi-NA Parallel Set think it is an SPI set but no markings, some used, some new in near new condition - $125
Large CC Craley Boring head, shank turned down to 3/4 but still some 1" left - $40
Small CC Craley Boring head, shank turned down to 3/4 but still some 1" left - $30
Shop made? small fly cutter - $10
Lot of center drills -
Injection Molding Tooling 3/4 Radius - $50 for both
Various Letter and Number punches -
SPI Sine Bar Kit, used some light surface rust -
4x Bimba 0912-DH used but appear functional - $30/ea or all for $100
Last edited: