What's new
What's new

FS: Indicators, Drill chucks, lots of small misc

Hey lazz I am trying to interpret picture 10.
I am interested in the valve with 2 snaplock hoses on it, but I can't tell if it is 10F (sold) or 10B (not sold?).
FS__Indicators__Drill_chucks__lots_of_small_misc.jpg

Thanks
 
If I have been paid you have a PM with a tracking number.
If I missed you PLEASE speak up....

This is what I think is left....

Picture #1

C) Helios 6" calipers a little stiff $10
F) 18" Im callin it for parts $5



Picture #2

C) Brown & Sharp 2-3 $20
D) Brown & Sharp 1-2 $20


Picture #3

A) Shop made 1x2x3 $14 for the 3
B) Shop made 1x2x3 owner markings $10 for the pair
C) Shop made 1x2x3 owner markings $10 for the pair
F) Starrett 3" square $15
G) Brown & Sharp 4" $18

A) Albretch 1/32-1/2 light owner markings $100



Picture #5
E) 4 abused drifts from India $5 for all 4
F) Tap guides $3 each
G) Fly cutter 2-1/2 dia, 1/2 tool, 5/8 shank $5


Picture #6
B) Lufkin 3-4 shows some wear $15
H) Sandvik insert removal tool $2

Picture #7

C) Folwer small hole gages .125-.400 $8
J) Brown & Sharp rusted and abused 749 v Blocks $10 per pair
L)SOLD>>>> Starrett #54 not perfect $40 for the pair

Picture #8

C) Starrett 24-441/5 .001-.500 crystal has issues $20
J) unlabeled Lufkin .001 $15


Picture #9

A) JH Williams TH_31-L $10 each
B) JH Williams Th-21 cuttoff $10
C) JH Williams TH-9 $15 each
D) JH Williams TH-1R $10
E) JH Williams TH01K $15
F) JH Williams TH-1S $10 each
G) JH Williams TH-000b 3/4X 3/8 shank boring bar holder $12
H) Armstrong 2080 3/4X 3/8 shank boring bar holder 1$12
J) Hardinge 6k collets 1/8, 1/4,5/16(2), 7/16, 1/2, 5/8 some light rust $50 for all 6
L) JH Williams TH-00b threading tools $15 one left


Picture #10

B) Amflo coolant stuff $10
C) Trico hose replacements $10 for 2


Thank you all again....
 
What is the purpose of that large diameter hose?
Suction on a surface grinder?

I bought that with plans to use it with a dust collector system on my mill for aluminum... I hate sweeping aluminum chips. They get every where and the wife seriously complains when me and the dogs track chips into the house.

I have the dust collector, most of the pipe and fittings... just about everything except room . :) But Im workin HARD on the room problem... :)
 
I bought that with plans to use it with a dust collector system on my mill for aluminum... I hate sweeping aluminum chips. They get every where and the wife seriously complains when me and the dogs track chips into the house.

I have the dust collector, most of the pipe and fittings... just about everything except room . :) But Im workin HARD on the room problem... :)

Oh heck, had not considered chips on the bottom of the shoes and the impact on the wife...... :crazy::willy_nilly:
 
Here is the most recent corrected list.
Its time to make a deal...
if you can use any of this before it heads to ebay make an offer...

Picture #1

C) Helios 6" calipers a little stiff $10
F) 18" Im callin it for parts $5



Picture #2

D) Brown & Sharp 1-2 $20


Picture #4

C) Rohm 0-3/8 German .454. shank $35


Picture #5
E) 4 abused drifts from India $5 for all 4


Picture #6
H) Sandvik insert removal tool $2


Picture #8

C) Starrett 24-441/5 .001-.500 crystal has issues $20
J) unlabeled Lufkin .001 $15


Picture #9

A) JH Williams TH_31-L $10 each
B) JH Williams Th-21 cuttoff $10
C) JH Williams TH-9 $15 each
D) JH Williams TH-1R $10
F) JH Williams TH-1S $10 each
G) JH Williams TH-000b 3/4X 3/8 shank boring bar holder $12
H) Armstrong 2080 3/4X 3/8 shank boring bar holder 1$12
J) Hardinge 6k collets 1/8, 1/4,5/16(2), 7/16, 1/2, 5/8 some light rust $50 for all 6
L) JH Williams TH-00b threading tools $15 one left


Picture #10

B) Amflo coolant stuff $10
C) Trico hose replacements $10 for 2
 








 
Back
Top