What's new
What's new

FS: Misc tooling, Mics, calipers, 1x2x3 blocks and other stuff..

Hi Lazz,

I would take 2D and 2E.

D) Fowler 0-1, 1-2, 2-3 .0001 mic set $35
E) No name no bad telescoping guage set 5/16 to 1 1/4 $7.50
 
If not spoken for, i'll take:

Pic 3 - G $30
Pic 5 - A $15
Pic 5 - J $25
Pic 5 - Q $5
Pic 6 - P $5
Pic 7 - P $10
Pic 8 - G $25
Pic 11 - D $20

Thanks
Jim
 
WOW things have been busy here.... It only took me too long to get tracking numbers out.... If you have paid and dont have a number let me know and Ill try to figure out whats going on...




Here is the revised list of whats remaining.



Not pictured are 2 small flat rate boxes full of allen wrenches. Pay the shipping $7 and get a box misc of allen wrenches.... they will need cleaning

Picture #1


A) Starrett 18" #454, not perfect and stained $35
B) Mitutoyo grade B incomplete set. Most are Mitutoyo with a few Weber and no-name as well. Missing
1", .900, .750, .400, .200, .135, .114, .105, .1002, .1001 $75
C) Mitutoyo 192-146 12", No box but nice, A name has been rubbed out on the base. $135
H) Mitutoyo 6" dial caliper $30


Picture #2

C) Mitutoyo 141-133 Nice with a ugly box. $70
D) >>>SOLD<<<Fowler 0-1, 1-2, 2-3 .0001 mic set $35
E) >>>SOLD<<<No name no bad telescoping guage set 5/16 to 1 1/4 $7.50
F) Mitutoyo 104-137 .001 to 6" with standards, another ugly box $65
G) Starrett radius guage set, bad pouch to hold them. $20
Q) Nice 8" caliper. My guess would be it was an apprentice project long ago. $10
R) Craftsman drill guage $3

Picture #3

R) Starrett 296 scale clamp $15



Picture #4

B) Jacob 75A 1/4-3/4 #2 MT shank $65
C) Rohm 1/32- 5/8 3/4 shank $40
D) Jacob 34B 0-1/2 #2 MT shank kinda stiff $25
E) Albretch 1/32- 1/2 Owner marked 1/2" shank, very light abuse $75
F) Jacob 7-1A 0-1/4 5/8 shank $10
G) Jacob 1A 0-1/4 short #2 mt $10
I) No Name 4" face mill with 4 inserts 1" shank $15
P) NO Name 3" boring head , The R8 shank shows pipe wrench wear $75
Q) 40MM-VF-12541 Sandvik $30



Picture #6

B) Starrett last word indicator $65
E) Interapid .0005 312b-2 needs to preload to work in both directions... $20
G) Federal a60 .001 nice $20

Picture #7

A) Indicator base $5
B) Indicator base $3
D) Indicator base $5
H) Pile-O center drills $20
I) If your chisel needs sharpening this is it Craftsman $5
J) #3 MT live centers. work yet need some cleaning $10 each

Picture #8

C) Adjustable reamers some shanks have been spun... about 1/2 to just over an inch $25
E) Drill Doctor 1/8"-3/4" and a VHS to show you the right way $35



Picture #9

A) 18 used end mills all okay. 1/8-5/8 $30
E) Over 75 new and used taps $60
F) 10 like new carbide end mills 1/8-3/4 $50
G) Over 100 used taps $50

Picture #10

B,D) Used Stones that could use cleaning $12 per pile
E) Feeler gages >>> A SOLD<<< $3 each
F) Edge finders >>> D,E,F SOLD<<< $3 each


Picture #11

A) and Picture 12 80+ Misc Inserts $100
B) Files $15
 
WOW things have been busy here.... It only took me too long to get tracking numbers out.... If you have paid and dont have a number let me know and Ill try to figure out whats going on...




Here is the revised list of whats remaining.



Not pictured are 2 small flat rate boxes full of allen wrenches. Pay the shipping $7 and get a box misc of allen wrenches.... they will need cleaning

Picture #1


A) Starrett 18" #454, not perfect and stained $35
B) Mitutoyo grade B incomplete set. Most are Mitutoyo with a few Weber and no-name as well. Missing
1", .900, .750, .400, .200, .135, .114, .105, .1002, .1001 $75
C) Mitutoyo 192-146 12", No box but nice, A name has been rubbed out on the base. $135
H) Mitutoyo 6" dial caliper $30


Picture #2

C) Mitutoyo 141-133 Nice with a ugly box. $70
D) >>>SOLD<<<Fowler 0-1, 1-2, 2-3 .0001 mic set $35
E) >>>SOLD<<<No name no bad telescoping guage set 5/16 to 1 1/4 $7.50
F) Mitutoyo 104-137 .001 to 6" with standards, another ugly box $65
G) Starrett radius guage set, bad pouch to hold them. $20
Q) Nice 8" caliper. My guess would be it was an apprentice project long ago. $10
R) Craftsman drill guage $3

Picture #3

R) Starrett 296 scale clamp $15



Picture #4

B) Jacob 75A 1/4-3/4 #2 MT shank $65
C) Rohm 1/32- 5/8 3/4 shank $40
D) Jacob 34B 0-1/2 #2 MT shank kinda stiff $25
E) Albretch 1/32- 1/2 Owner marked 1/2" shank, very light abuse $75
F) Jacob 7-1A 0-1/4 5/8 shank $10
G) Jacob 1A 0-1/4 short #2 mt $10
I) No Name 4" face mill with 4 inserts 1" shank $15
P) NO Name 3" boring head , The R8 shank shows pipe wrench wear $75
Q) 40MM-VF-12541 Sandvik $30



Picture #6

B) Starrett last word indicator $65
E) Interapid .0005 312b-2 needs to preload to work in both directions... $20
G) Federal a60 .001 nice $20

Picture #7

A) Indicator base $5
B) Indicator base $3
D) Indicator base $5
H) Pile-O center drills $20
I) If your chisel needs sharpening this is it Craftsman $5
J) #3 MT live centers. work yet need some cleaning $10 each

Picture #8

C) Adjustable reamers some shanks have been spun... about 1/2 to just over an inch$25
E) Drill Doctor 1/8"-3/4" and a VHS to show you the right way $35



Picture #9

A) 18 used end mills all okay. 1/8-5/8$30
E) Over 75 new and used taps$60
F) 10 like new carbide end mills 1/8-3/4 $50
G) Over 100 used taps $50

Picture #10

B,D) Used Stones that could use cleaning$12 per pile
E) Feeler gages>>> A SOLD<<<$3 each
F) Edge finders>>> D,E,F SOLD<<<$3 each


Picture #11

A) and Picture 12 80+ Misc Inserts$100
B) Files$15
Money is in the mail for the Criterion boring head and Albrecht chuck.
 
I can say not thank you enough guys.... yet another small portion of the hoard has gone away.... Thanks!

Time for the last update...
This coming weekend it will all go on the Evil FleaBay...


Not pictured are 1 small flat rate boxes full of allen wrenches. Pay the shipping $7 and get a box misc of allen wrenches.... they will need cleaning


Picture #2

C) Mitutoyo 141-133 Nice with a ugly box. $70
F) Mitutoyo 104-137 .001 to 6" with standards, another ugly box $65
G) Starrett radius guage set, bad pouch to hold them. $20
Q) Nice 8" caliper. My guess would be it was an apprentice project long ago. $10
R) Craftsman drill guage $3

Picture #3

R) Starrett 296 scale clamp $15



Picture #4

B) Jacob 75A 1/4-3/4 #2 MT shank $65
C) Rohm 1/32- 5/8 3/4 shank $40
D) Jacob 34B 0-1/2 #2 MT shank kinda stiff $25
F) Jacob 7-1A 0-1/4 5/8 shank $10
G) Jacob 1A 0-1/4 short #2 mt $10
I) No Name 4" face mill with 4 inserts 1" shank $15
P) NO Name 3" boring head , The R8 shank shows pipe wrench wear $75
Q) 40MM-VF-12541 Sandvik $30



Picture #6

B) Starrett last word indicator $65
E) Interapid .0005 312b-2 needs to preload to work in both directions... $20
G) Federal a60 .001 nice $20

Picture #7


I) If your chisel needs sharpening this is it Craftsman $5
J) #3 MT live centers. work yet need some cleaning $10 each

Picture #8

C) Adjustable reamers some shanks have been spun... about 1/2 to just over an inch $25
E) Drill Doctor 1/8"-3/4" and a VHS to show you the right way $35



Picture #9

A) 18 used end mills all okay. 1/8-5/8 $30
E) Over 75 new and used taps $60
F) 10 like new carbide end mills 1/8-3/4 $50
G) Over 100 used taps $50

Picture #10

B,D) Used Stones that could use cleaning $12 per pile
E) Feeler gages >>> A SOLD<<< $3 each
F) Edge finders >>> D,E,F SOLD<<< $3 each


Picture #11

A) and Picture 12 80+ Misc Inserts $100
B) Files $15
 
Last edited:
Got my care package today. Crazy good packing - I'm saving that box liner for shipping out something heavy.

I got a little extra - small solid carbide boring bar. Much appreciated I just hope it wasn't meant for someone else.

Thanks!
 








 
Back
Top