tlowe
Plastic
- Joined
- Mar 3, 2014
- Location
- Dysart, Iowa
Have this drill press and cannot figure out the maker. It is about 14" tall. The belt you see is 1/4" and is same as a sewing machine uses.
There is a rack/pinion to run the head up and down. Power is transmitted by a keyed shaft from the belt driven 1:1 gear box. Millers Falls chuck is on it and no other casting or stamping that I can find yet.
There is a rack/pinion to run the head up and down. Power is transmitted by a keyed shaft from the belt driven 1:1 gear box. Millers Falls chuck is on it and no other casting or stamping that I can find yet.