machineit2
Hot Rolled
- Joined
- Jan 21, 2011
- Location
- Tennessee
I do a lot of 303 and 304 stainless (about 2" x 2") parts that I need to polish to a mirror finish afterward. I need to know the type of face mill you would use for a very smooth finish.. Right now I have to spend hours sanding before I can polish, (to get all machining marks off of the parts.) Right now I use a positive rake 4 edge insert.
I thank you in advance for your suggestions on face mills and inserts.
I thank you in advance for your suggestions on face mills and inserts.