CWC(4)
Cast Iron
- Joined
- Jan 2, 2017
- Location
- North Central MA
There are a few small stains on the angle blocks, but not on measured surfaces and a few stains on the 123 blocks as well.
Overall, everything is in good shape, most lightly used if at all. Although these are probably not the precision/quality for most job shops, they're certainly fine for loaners, home shop etc.
$35. for the lot plus shipping. Probably would have to all go in a medium Flat Rate box. Check or MO please. Sorry, no paypal Pending
Includes everything in the pictures except the 6" rule.
* 25 pc. stainless steel radius gage set in case
* 10 pc. 3” ground angle block set – w/ blocks of 30, 25, 20, 15, 10, 5, 4, 3, 2 & 1 degrees
* 4” solid machinist square
* Matched pair of 1-2-3 blocks
* 60 deg. Fishtail gage
* Set of thread measuring wires in case, 16 groups of 3 wires - .013 to .185 w/ chart
* Single “V” block w/ clamp
* Small fixed mag. Base w/ snug (6" rule not included)
Overall, everything is in good shape, most lightly used if at all. Although these are probably not the precision/quality for most job shops, they're certainly fine for loaners, home shop etc.
Includes everything in the pictures except the 6" rule.
* 25 pc. stainless steel radius gage set in case
* 10 pc. 3” ground angle block set – w/ blocks of 30, 25, 20, 15, 10, 5, 4, 3, 2 & 1 degrees
* 4” solid machinist square
* Matched pair of 1-2-3 blocks
* 60 deg. Fishtail gage
* Set of thread measuring wires in case, 16 groups of 3 wires - .013 to .185 w/ chart
* Single “V” block w/ clamp
* Small fixed mag. Base w/ snug (6" rule not included)
Last edited: