What's new
What's new

Introduction of Dutch watchmaker

Michkh

Plastic
Joined
Jun 7, 2018
Location
Delft
Hey all!

Thanks a lot for having such a platform.
I am a watchmaker from the Netherlands, and I am in the beginning of building my watch brand. I focus on additive manufacturing combined with conventional techniques, as I think the combination is highly interesting.

Over time, I learned quite something through reading topics here. My focus is on traditional machines, and I learn most of the tricks by doing. So, quite a conventional rookie.

In the search of a spindle for an old Deckel G0 pantograph, I decided to subscribe here, as I might have to rely on your knowledge, and participate every now and then, especially when it comes down to watchmaking or related trades.

Thank you!

Michiel
 
Hey all!

Thanks a lot for having such a platform.
I am a watchmaker from the Netherlands, and I am in the beginning of building my watch brand. I focus on additive manufacturing combined with conventional techniques, as I think the combination is highly interesting.

Over time, I learned quite something through reading topics here. My focus is on traditional machines, and I learn most of the tricks by doing. So, quite a conventional rookie.

In the search of a spindle for an old Deckel G0 pantograph, I decided to subscribe here, as I might have to rely on your knowledge, and participate every now and then, especially when it comes down to watchmaking or related trades.

Thank you!

Michiel

I would also recommend the Yahoo Panto group. There are a lot of knowledgeable guys over there too. I have a GK-12 and they have helped me out plenty of times.
Ron

Yahoo! Groups
 
I would also recommend the Yahoo Panto group. There are a lot of knowledgeable guys over there too. I have a GK-12 and they have helped me out plenty of times.
Ron

Yahoo! Groups

Some (many) of the Yahoo groups are moving to groups.io and your group might migrate there at some point. Other machining forums have already gone there, hardinge mill and hardinge lathe.
 








 
Back
Top