What's new
What's new

Just got a Hendey Lathe....Need help Identifying

I just found something that might work on the roton site. I will confirm the measurements when I get home from work tonight.

Scott
 
Well I sent in a request for a quote to one of the gear manufacturers and got a reply. They told me it would be 4000.00 for the 2 gears to be cut. These were the gears for the selector in the quick change gear box. I turned the blanks and cut the gears myself.( This was the first time I have ever cut a gear) And they turned out great. Yesterday I reassembled the gear box and now I have powerfeed in both axis. I also made a new cross feed nut for the lead screw and have all but eliminated the backlash, I am so excited to start turning on this lathe tonight.

Thanks for all of the assistance

Scott
 
Hendeyman makes parts from the original Hendey drawings - see his post above
I made a cross feed for my 16 hendey tie bar lathe on my logan 200 it took a lot of concentration but did get it done and a new cross feed brass nut. Made that 10 years and am about to get the hendey running.
 








 
Back
Top