leeko
Stainless
- Joined
- Jun 30, 2012
- Location
- Chicago, USA
I have 2 vertical milling heads for sale. Both are complete with mounting brackets and matching drive gears. Both are heavy, I would prefer not to ship. Willing to hold for a while with payment if needed. Located in Chicago. I would like $400 for each.
1) Kearney & Trecker swivel head with mount bracket for 3H/2K horizontal mill. 40 taper spindle. comes with matching drive gear, which mounts directly to spindle nose. Drive gear has a chip out of one tooth, but shouldn't affect function. Mounting bracket has a corner chipped off one clamp piece, should be a straightforward repair.
2) - Universal milling head for cincinnati 420-16-20HD mill, with mounting bracket and 50 taper drive gear. This head has the two joints which allow it to be set to any angle. 50 taper spindle. No obvious damage or concerns.
K&T head pictures below
Cincinnati head pictures in next post
Thanks for looking,
Lee
Sent from my SM-G998U using Tapatalk
1) Kearney & Trecker swivel head with mount bracket for 3H/2K horizontal mill. 40 taper spindle. comes with matching drive gear, which mounts directly to spindle nose. Drive gear has a chip out of one tooth, but shouldn't affect function. Mounting bracket has a corner chipped off one clamp piece, should be a straightforward repair.
2) - Universal milling head for cincinnati 420-16-20HD mill, with mounting bracket and 50 taper drive gear. This head has the two joints which allow it to be set to any angle. 50 taper spindle. No obvious damage or concerns.
K&T head pictures below
Cincinnati head pictures in next post
Thanks for looking,
Lee
Sent from my SM-G998U using Tapatalk