wschwarz
Plastic
- Joined
- Jan 14, 2013
- Location
- Canyon Country, CA
This Lehmann Lathe is now for sale at the GSAauction.gov website.
My apologies if I'm in the wrong category.
Auction closes 8/18/2023
Sale Number 4-1-QSC-I-23-281-006
Website: GSAauctions.gov
https://gsaauctions.gov/auctions/au...Type=ALL_WORDS&searchText=lathe&status=active
Lehmann Hollow Spindle Raised Oil Field Lathe
Serial #5736
Year Delivered 1953
48” Front 4 Jaw Chuck
26” Rear 4 Jay Chuck
12” Thru Spindle Diameter
Spindle Speeds, 1.5 to 193
Threading: CNC
Taper Attachment: No, but CNC in both axis
Current mounted Alu. face plate: 62” in diameter
Swing over bed: ~74”
25” Head stock factory raised and mounted on a “C” size (32” -36”) bed
Cuck face to end of ways distance is 168”
Center to center distance between chuck face and tailstock is ~135”
Tailstock length at its base is 33”
KDK holder #30205
19” Lehmann steady rest inside diameter.
32” custom fabricated steady rest inside diameter
5” Dia. X ~72” long custom fabricated boring bar
Lehmann built-in live and dead center tailstock
CNC controls by FANUC
Ball lead screws retrofitted in both X & Y axis
~20 Plus horsepower
Electrics: 460v 3 phase
Bijur Automatic Oiler
Thanks, Werner
My apologies if I'm in the wrong category.
Auction closes 8/18/2023
Sale Number 4-1-QSC-I-23-281-006
Website: GSAauctions.gov
https://gsaauctions.gov/auctions/au...Type=ALL_WORDS&searchText=lathe&status=active
Lehmann Hollow Spindle Raised Oil Field Lathe
Serial #5736
Year Delivered 1953
48” Front 4 Jaw Chuck
26” Rear 4 Jay Chuck
12” Thru Spindle Diameter
Spindle Speeds, 1.5 to 193
Threading: CNC
Taper Attachment: No, but CNC in both axis
Current mounted Alu. face plate: 62” in diameter
Swing over bed: ~74”
25” Head stock factory raised and mounted on a “C” size (32” -36”) bed
Cuck face to end of ways distance is 168”
Center to center distance between chuck face and tailstock is ~135”
Tailstock length at its base is 33”
KDK holder #30205
19” Lehmann steady rest inside diameter.
32” custom fabricated steady rest inside diameter
5” Dia. X ~72” long custom fabricated boring bar
Lehmann built-in live and dead center tailstock
CNC controls by FANUC
Ball lead screws retrofitted in both X & Y axis
~20 Plus horsepower
Electrics: 460v 3 phase
Bijur Automatic Oiler
Thanks, Werner
