sirAIG
Aluminum
- Joined
- Jan 10, 2019
- Location
- State College
There are many companies that make toolchangable speeders, but the few I have reached out to do not have options that can be automated in a Haas 20 tool umbrella. There are either interference problems from the locating/drive "dogs" that need the adapters bolted to the spindle, or it seems they require the user to hook something up post tool change in order to proceed with machining.
I have a 2019 Haas Mini Mill 2 w/ 20atc umbrella (6k spindle) as well as a 2004 TM1 w/ no toolchanger (4k spindle, but can be increased to 6k via parameter change). Both have identical spindle cartridges from what I have read, and visually (without touching a caliper to them) they look identical as well.
Does anyone know of any company that makes anything that would fit the bill?
I have a 2019 Haas Mini Mill 2 w/ 20atc umbrella (6k spindle) as well as a 2004 TM1 w/ no toolchanger (4k spindle, but can be increased to 6k via parameter change). Both have identical spindle cartridges from what I have read, and visually (without touching a caliper to them) they look identical as well.
Does anyone know of any company that makes anything that would fit the bill?