MACHINERY FOR SALE

[reddfxe]

Saimp FV-0 SM knee mill- $2000 obo Sold with an owner's manual. Has a 4 1/8 quill, with iso 40 taper. Also included with quick release rigid holders and drill chuck set. Tons of additional tooling available such as endmills, drills, reamers, boring heads, as well as 12" Bridgeport Rotary table, Hartford Head... too much to list.
Clausing Colchester C13 Gap Lathe $2000 obo Sold with owner's manual. Included with 3 position post holder, MS3 taper for tailstock with a 1/2 Jacobs chuck, 8" 3 jaw chuck and 5C draw tube and adapter (as well as various 5C collets, set is incomplete but basic). Tons of additional tooling available such as OD and ID holders as well as OD and ID tools (cnmg, vnmg, top notch, ccmt bars, and inserts), od groovers, knurl, cutoff, etc.

Pexto 42" Mechanical Shear $1700 obo Clean, sharp, and operational unit.

Carolina HD10 Bandsaw $800 obo Clean sold with two good lenox blades

Roto-Phase 1-3 5HP converter $750 obo

Equipment listed above can be purchased as a group for $6000 and will not be sold individually until the beginning of next month. There is also a ton of inspection equipment as well and an 8000lb car lift $1000 obo. This is an all-in-one startup operation, and all machines are in good working condition. LOCAL PICK-UP ONLY SIMSBURY, CT 06070
Please contact Steve at [email protected] for photos or questions.

 

[Garwood]

Carolina HD10 Bandsaw $800 obo Clean sold with two good lenox blades

Those Carolinas have quite the reputation. They're almost shaped like a real bandsaw.

 

[reddfxe]

It's certainly no Amada, but it has done its job for the last 15 years so...I don't see why it couldn't go another 15 at that.

 

[ponderingjunkman]

I have that same lift! When we removed it from the quicklube place that was slated for destruction to make way for a food store, it was apparent that it had been there many years by the level of grime and crud. But what was shocking was that it was Not Bolted Down! It's a stable design!

 

[reddfxe]

It's a fairly common old unit... But I'd bolt it down all the same.

 

[reddfxe]

 

[reddfxe]

Knee Mill, Bandsaw,phase converter, pneumatic cylinder, ac/dc controllers, electric linear ram(2' stroke 5/8yoke), cutting tools, boring heads rotary table, endmills, drills, reamers, collets, 3jaw chucks, holding Vises, pneumatic vise and pneumatic 5c, etc.... Too much to list. $2500 for everything. Well over $5000 worth of equipment and tooling. I'll even load the mill for FREE!!! This is a crazy good deal!!!! Will consider trades for a decent 4x4 ext cab pick up...Also still have some gems bot listed...