mattthemuppet's eBay shoppe

[mattthemuppet]

hi all,

I'm in the process of digesting a bad case of auction overexuberence and I'm starting to list a variety of different metal working tools on eBay. This will probably take me several months to work through so feel free to check in every so often
mattthemuppet's eBay shoppe

a few pics

 

[mattthemuppet]

 

[Lock]

happen to have geometric die thats not listed yet?

 

[stevewatr]

happen to have geometric die thats not listed yet?

What size are you looking for? I might have one left. I also have some chaser sets left.

Steve.

Sent from my LM-G900TM using Tapatalk

 

[Darren McCarley]

Where in Texas? May want to swing by and buy a few/many items. (Im in DFW)

 

[mattthemuppet]

happen to have geometric die thats not listed yet?

I have a whole box, somewhere What sizes are you after? I'll dig it out and have a look to see what I have.

 

[mattthemuppet]

Where in Texas? May want to swing by and buy a few/many items. (Im in DFW)

Hey Darren, I'm in San Antonio, so a bit of a trek unfortunately but USPS flat rate does help for small'n'heavy stuff.

 

[reggie_obe]

Link no work......

 

[Lock]

I have a whole box, somewhere What sizes are you after? I'll dig it out and have a look to see what I have.

it would most likely go on a hardinge chucker most of the time so 5/8shank, prolly a 5/16 head

 

[mattthemuppet]

Link no work......

not sure what's going on there, here's one of auctions, a set of meat tenderisers in waiting
Serrated top jaws for metal lathe H+R 231711-001 C-14878-HJ-1 American T+G | eBay

and here's the link to all items
https://www.ebay.com/sch/mattthemuppet/m.html?item=284596570077&rt=nc&_trksid=p2047675.m3561.l2562

maybe the hotlink fanciness in the original post wasn't working..

 

[Chips Everywhere]

I've trade with mattthemuppet before. To those who may be interested in buying from him. Good guy, parts arrived nicely packed, part was in good shape, no junk.

 

[mattthemuppet]

thanks Chips, that's very kind of you to say










(remind me to stick some extra end mills in your next box )

 

[mattthemuppet]

it would most likely go on a hardinge chucker most of the time so 5/8shank, prolly a 5/16 head

I found the box, but the head I bought is also a 5/16 head. Most of the chasers are larger sizes but if I find any duplicates for the 5/16 I'll let you know. I'll finish sorting them out tomorrow.

 

[4GSR]

Matt, is the car for sale in the first picture?

 

[mattthemuppet]

no way, the wife would kill me, dig me up and kill me all over again. I'm no car modder, but I did think it looked pretty cool slammed. Handled like a grumpy pig though.

 

[mattthemuppet]

Slowly plugging away and thanks to everyone who has contributed to the "get Matt's arse out of a sling" effort.

Got some used carbide endmills up





a bunch of HSS end mills, center drills and lathe bits, plus a couple of lots of brazed carbide

 

[mattthemuppet]

Quill Master adjustable angle head in great mechanical condition


a bunch of 2" OD tool bushings


and some big boy taps (I still miss that 3" tap Ken )

 

[4GSR]

.......................................(I still miss that 3" tap Ken )

Hehe. It's here if you ever need it! Just give me a holler.

What would be some of the sizes of these taps?

 

[mattthemuppet]

Hehe. It's here if you ever need it! Just give me a holler.

What would be some of the sizes of these taps?

Might have to come down and visit it next time I'm in the area..

The sizes are one 1 1/8-16, two 1 1/4-12, one 1 3/8-12, one 1 5/16-16, one 1 1/2-18, two 1 5/8-12 and one 1 7/8-12. One of them is a bit worn, can't remember which one right now, but the rest are in pretty good shape.

 

[alphonso]

What do you want for the Quillmaster?