Luis Vedoy
Plastic
- Joined
- Mar 20, 2023
Hello! I am trying to program a MAZAK QT-C 200M Lathe, MAZATROL SMOOTHC.
My question is if I can limit how much effort the tool makes. For example, if you pass a certain % of effort, the machine stops, or if the machine performs a certain operation and the effort is equal to zero, I know that the tool broke and also stop the operation.
For this programming it has to be EIA/ISO. I need examples because I found the M Codes but I couldn't understand how to fit in the program, if anyone has this knowledge please help me!!!! Thanks!
Does anyone know where I'm going wrong?
M202
G40 G18 G99 G80 G21
T0606
G53.5
G18
G97 S3500 M3
G1 X0 Z-30 F1.
(SET PEAK LOUD TO 999)
M378 A999 (999 IS MAX LOUD)
(1)
M376 A100
M377 A20
M379 A01
(2)
M376 A50
M377 A40
M379 A02
M371 A201
M374
X150 Z150
G0 X0.0 Z-36. M8
G97 S3500 M3
Z-38
M371 A602
G1 Z-70.5 F.33
M370 A602
G0 Z-38.
M3
G0 X150 Z150
M30 %
PS: I used google translator, sorry if there are spelling mistakes, I hope you can understand.
My question is if I can limit how much effort the tool makes. For example, if you pass a certain % of effort, the machine stops, or if the machine performs a certain operation and the effort is equal to zero, I know that the tool broke and also stop the operation.
For this programming it has to be EIA/ISO. I need examples because I found the M Codes but I couldn't understand how to fit in the program, if anyone has this knowledge please help me!!!! Thanks!
Does anyone know where I'm going wrong?
M202
G40 G18 G99 G80 G21
T0606
G53.5
G18
G97 S3500 M3
G1 X0 Z-30 F1.
(SET PEAK LOUD TO 999)
M378 A999 (999 IS MAX LOUD)
(1)
M376 A100
M377 A20
M379 A01
(2)
M376 A50
M377 A40
M379 A02
M371 A201
M374
X150 Z150
G0 X0.0 Z-36. M8
G97 S3500 M3
Z-38
M371 A602
G1 Z-70.5 F.33
M370 A602
G0 Z-38.
M3
G0 X150 Z150
M30 %
PS: I used google translator, sorry if there are spelling mistakes, I hope you can understand.
Last edited: