What's new
What's new

Model 60 Tailstock traverse handle

After watching for one for a long time I'm in the process of making one. Gear is 8 dp 14.5 PA if I remember right and 12T. I found a 14T on ebay and I bought the handle from JW Winco. They are actually pretty nicely made and about $50. I think the gear was about 25. I had the bracket on the tailstock so that wasn't needed. Dave
 
Not artful but it works. Of course if I had it to do over, I'd make a bunch of changes, including putting the vertical arm closer to the bed and reversing the position of the cylinder with the bushings for the shaft but good enough for who it is for. Dave
 

Attachments

  • DSCN4317.JPG
    DSCN4317.JPG
    228.4 KB · Views: 15
  • DSCN4318.JPG
    DSCN4318.JPG
    232.7 KB · Views: 14








 
Back
Top