What's new
What's new

OKK V1 Meldas 64 Control... HELP

k3v1n22

Plastic
Joined
Mar 1, 2021
So i bought an OKK V1 Meldas 64 control (Mitsubishi) and well the battery died. Wasn't much of a worry because we bought a new one and were expecting to input new parameters as soon as it launched buuuttt... the screens black with just an orange tic in the top left and nothing happens and no buttons hold any control it just beeps at ever button with no function.. If anyone has any tips or suggestions would greatly appreciate the help!
 
You need to be mdi with plc turned off, switch in the back of the cnc unit set to 1, and estop in
That should get you to parameter pages. Set comms for rs232, and then load all1, in 1 all2 in 2 and all3 in 3, these probably need to be from the machine tool builder.
The 99 setting seems to be a 60 control use case.
 








 
Back
Top