theyorugua
Plastic
- Joined
- May 13, 2024
- Location
- Sweden
Hello.
Is my first time with this cycle90 and i have problems.
When i test a program i found on internet this works:
"N10 G90 G71 M06 T03 D01 ;
N20 M03 S500 M08 ;
N30 G17 G00 X0 Y0 Z50 ;
N40 CYCLE 90 ( 20 , 0 , 5 , -20 , , 30 , 25 , 2 , 200 , 2 , 0 , 0, 0,0)
N50 G90 G00 Z100 ;
N60 M05 M09 M30 ;"
i try to make an external thread (140D) and this is the error i got.
10720 Channel 1: Block N40 axis YM1 software limit switch.
"N30 G90 G17 X0 Y0 Z50
N40 CYCLE90(20 , 0, 5, -20 ,, 140, 136, 2, 200 , 2 , 1 , 0,0)"
Also, when i change to a bigger thread diameter for the internal thread program i got the same error.
thanks in advance
Is my first time with this cycle90 and i have problems.
When i test a program i found on internet this works:
"N10 G90 G71 M06 T03 D01 ;
N20 M03 S500 M08 ;
N30 G17 G00 X0 Y0 Z50 ;
N40 CYCLE 90 ( 20 , 0 , 5 , -20 , , 30 , 25 , 2 , 200 , 2 , 0 , 0, 0,0)
N50 G90 G00 Z100 ;
N60 M05 M09 M30 ;"
i try to make an external thread (140D) and this is the error i got.
10720 Channel 1: Block N40 axis YM1 software limit switch.
"N30 G90 G17 X0 Y0 Z50
N40 CYCLE90(20 , 0, 5, -20 ,, 140, 136, 2, 200 , 2 , 1 , 0,0)"
Also, when i change to a bigger thread diameter for the internal thread program i got the same error.
thanks in advance
