What's new
What's new

Someone can assist me with a recipe cake 'how to storage a sub-program in CHARMILLES panel control.

MAGNOMOLDES

Plastic
Joined
Sep 27, 2023
Communities,

I generate a G-Code program to run in CHARMILLES panel control, this program is section of gear. So, I used the sub-program resource to generate this path contour and then apply the rotate.

What happened I do not know if I need to storage the sub-program in sub-program folder or rename the sub-program according to the main program and then storage with the others main programs.

O208
G11 (TEC, LT25A)
G11 (WIR, LT25A)
G10 P16 R0
G90 G21
G92 X-5.0 Y25.0 I26 J15
M60
G1 G41 X-2.8133 Y19.2160
M98 P2081 Q-45 L8
G40 G1 X-5.0 Y25.0
M50
M30%
O2081
G2 X-1.6559 Y19.9313 I1.6559 J-19.9313
G2 X1.6559 Y19.9313 I1.6559 J-19.9313
G2 X2.8133 Y19.2160 I-0.1242 J-1.4948
G3 X4.8375 Y14.1985 I0.4940 J0.0773
G2 X6.6192 Y13.4605 I-4.8375 J-14.1985
G2 X7.1345 Y13.5052 I0.2206 J0.4487
G2 X11.5985 Y15.5750 I7.4605 J-10.2296
M99

Please, I count on you.

I appreciate you much.
 








 
Back
Top