Takisawa 2-axis lathe(s) for sale So Cal, great condition

[eaglemike]

I want to sell one, maybe both, Takisawa TCN-2100 L6 lathes. They are nearly twins. I bought both new, both used for 1 shift light production, not used every day. One has a parts catcher. Purchased new from Yamzen, first one 2017 IIRC, second one late 2018 or 2019. I'll look it up and update here later. Mostly 6061 aluminum, a small bit taking a light cut and threading 7/8" 1144. I did start the one with the parts catcher the wrong place in the program once, and broke a tool against the part - Yamazen had to come out a re-align the turret. That's all the service needed. These are box way machines, 5K rpm, with 5 decimal resolution. (Yamazen standard package) 1” square and 1.25” ID holders, 8” chuck, A2-6 spindle,15 hp with 2” bar capacity and tailstocks, belt type chip conveyors. Wwill include tool holders that came will machine when new, and the chucks of course. Work was done in collets, I don't think we ever used the chucks at all. New these would cost $90k to $95K. $58k for machine with parts catcher, $55K without. Will add pics, including pics of hour meter. These are really nice machines, gold standard for reliability, very accurate. I'm getting a dual spindle machine with live tools. Thanks for looking! Message with questions.

 

[Pete Deal]

Boy, if I was closer I'd be thinking on one of these very carefully. Sounds like a great deal.

 

[eaglemike]

Thanks, Pete!
These are the really nice stout machines from Takisawa Japan. In case it was missed - they are box way. Super nice. I want to sell at least one to make room for the new machine. Zero issues. I love machines like this as I hate the stress of unreliable machines. Fanuc control of course.

 

[BROTHERFRANK]

Here are some pics of Mike's machines.

 

[BROTHERFRANK]

Really nice machines. 15 hp, 12 station servo turret with Curvic coupling, super accurate, box ways in X and Z, 1" square tooling, 1.25" ID tool holders (6 included each machine), hydraulic tailstock with Mcode, Grundfos 520W coolant pump. Japan built. Mike, I see the hours are about 300. That is super low.

 

[latheman78]

Never heard anyone say a bad word about a Takisawa CNC Lathe.

 

[Garwood]

I see the hours are about 300.

$133/hr

Makes me appreciate my used junk!

 

[BROTHERFRANK]

Bump to the top. These are remarkable box-way, Japan built, Fanuc control lathes. A great opportunity on quality machines!

 

[triumph406]

For a machine with max Z of 600mm, that's a compact machine

 

[BROTHERFRANK]

Hi all. EagleMike has sold both of these machines. Thank you.