Rocketdc
Aluminum
- Joined
- May 24, 2020
I've got a Geka ironworker that was making additional screeching sounds on top of the typical hum when the motor is powered on. I opened the mechanical cabinet below and the hydraulic oil reservoir looks normal, the gauges both read zero while the machine was idling and when I cycled it through a cut (have no idea what they should read, I never checked before). I only cycled the machine one time before the motor voluntarily shut off. The button lights are still illuminated on the panel, just get no response when I push the button that turns on the motor.
Any ideas what I should be looking for/testing? I contacted the local distributor a week ago when this first happened and still no response from them.
Any ideas what I should be looking for/testing? I contacted the local distributor a week ago when this first happened and still no response from them.
Last edited: