Very old Fellows Gear Shapers to be sold

[Mud]

Here's a link to the information - I believe it's time critical.

http://groups.google.com/groups?dq=&hl=en&lr=&ie=UTF-8&group=alt.machines.cnc&selm=8ktorus3fl47q8ceuuu4j6t9uo36mpjeeg%404ax.com

 

[gvasale]

Went to the location today, getting back at 5:15 pm. Two old Fellows gear shapers are there. One vertical shaper is there. One very large hydraulic press, an old 4 post style is there. A couple of cylindircal grinders are there. Another is loaded on a trailer dump. A large B&S horizontal mill had the knee torched off. One large planer bed is now in three pieces. There is one Ohio shaper, with what looks like a 20 to 24 inch stroke. There ia a small Hendy too. Also a bar shear and a couple of Dumore toolpost grinders, a few pedestal grinders and other odds and ends. Plenty of lead, babbitt etc. for all you bullet casters. One of the saddest things to see. Machines that no one loves anymore. Also a Cinncinatti vertical mill with table extenstion, and another large planer with a BP head attached to one side of the toolholding system. Time and interest are very important to stop it all from going to China. [email protected].