What's new
What's new

Wanted ! ! !

Hi Chris.

I'll probably sell my metric 40 taper direct collets, as I have other toolholders.

Having the long-reach head I have plenty of headroom. Too much, really, so I never have any use of the direct collets.

If interested, please write here or PM.

Cheers
Erik
 
WANTED:

Deckel FP1 (older model from 1930-1940s would work just fine), Aciera F3, or similar universal mill (Sixis, Schaublin, Maho, etc.) in decent working condition. Smaller mills such as Aciera F2 (or Schaublin 12, etc.) would also work. Open to restoring one that might not be in great shape.

I am located in southeast PA. Hence preference would be to find one within drivable distance.

Thanks.

Just wanted to add to my earlier post-

Given its larger work area, stouter build, etc., I would be open to the Deckel FP2 (or a clone, or similar machine) as well.

Thanks.
 
Could you possibly provide me with a list of the different close collects that you have and the price for each? If you offer any discounts for quantity please let me know that as well Thank you so much!
 
Hi Chris.

I'll probably sell my metric 40 taper direct collets, as I have other toolholders.

Having the long-reach head I have plenty of headroom. Too much, really, so I never have any use of the direct collets.

If interested, please write here or PM.


Cheers
Erik
my reply can be found below
 
Hi Chris.

I am getting ready to pick up a Mk.3 SK40 Deckel FP1 saturday.

(yes, greedy I am, hehe) So I can take some pictures of what I have - metric only, of course.

What sizes do you need?

Cheers
Erik
 
Hi Chris.

I just took these out of my FP1 cabinet.

Some have staining - doesn't look like rust to me.
And I don't feel like I have the time to clean them.

Sizes are:

2 x 6 mm
8 mm
10 mm
12 mm (special with internal thread)
14 mm
16 mm
2 x 18 mm
3 x 20 mm
2 x 20 mm (Edit: Correction: 22 mm)
25 mm (with internal thread)

Cheers
Erik
 

Attachments

  • DirectCollets2.jpg
    DirectCollets2.jpg
    97.7 KB · Views: 107
  • DirectCollets1.jpg
    DirectCollets1.jpg
    98.8 KB · Views: 90
Hi Chris.

I just took these out of my FP1 cabinet.

Some have staining - doesn't look like rust to me.
And I don't feel like I have the time to clean them.

Sizes are:

2 x 6 mm
8 mm
10 mm
12 mm (special with internal thread)
14 mm
16 mm
2 x 18 mm
3 x 20 mm
2 x 20 mm
25 mm (with internal thread)

Cheers
Erik

I'll take the 6mm, 10mm and 20mm
 
Hi all, I'm looking for:

- a copy of "Friedrich Deckel 50 Jahre" (book)

- a Deckel FP1 somewhat local (Toronto area - Ottawa - Montreal maybe). I did go see the one in Montreal Laurentian posted about in the "want to sell" thread...

- Could also use a 1/8" collet for my G1L and a DIN1451 mastercopy set

Thanks!
 
Hi All,

I am looking for a Deckel fp2,3,4NC, working or not working with
a universal table. I would prefer a 'flip-head', but would consider
an earlier version.

I don't want to have to import one from Europe.

Paul
 
Hi All,

I am looking for a Deckel fp2,3,4NC, working or not working with
a universal table. I would prefer a 'flip-head', but would consider
an earlier version.

I don't want to have to import one from Europe.

Paul

There’s a Deckel FP4NC Universal Rotary Table - Type 2038 that’s been on eBay for a while now. It’s in SE Michigan.


Sent from my iPhone using Tapatalk
 
Hello! My name is Lawson and I am new here.

I am looking to buy a Deckel FP2. I know, I know, I need to get in line :)

Since they are not that common compared to the other sizes, I am open to something bigger or smaller like a FP3, FP1, or even something from another company.

I am not looking for a project, but it also doesn't need perfect paint. I just want something that is tight, has all the essential tooling, and is ready to to be used.

If you have something for sale, please let me know as I am interested. Thanks for your time and help.
 
If you're on the west coast, I'm looking for a Deckel FP1. I'm in Seattle, but would be willing to drive within a 3 state radius, even across the border eh!
 
You're in luck!

Hello! My name is Lawson and I am new here.

I am looking to buy a Deckel FP2. I know, I know, I need to get in line :)

Since they are not that common compared to the other sizes, I am open to something bigger or smaller like a FP3, FP1, or even something from another company.

I am not looking for a project, but it also doesn't need perfect paint. I just want something that is tight, has all the essential tooling, and is ready to to be used.

If you have something for sale, please let me know as I am interested. Thanks for your time and help.

Lawson, I see that you're in Florida. There's an FP1 on eBay as of 5/2/2020, item number 274079232506. Good luck!
 
Looking for rollattachmemt for deckel kf2 in Europe. Walzengravier . Thanks if some one now where to Look.
 
Hi all,

I am looking for an Aciera F3 slotting head and raising head. If anyone has any leads would you please let me know.



Kind regards

Steven
 








 
Back
Top