What's new
What's new

Wanted ! ! !

May I suggest you spell out what you consider the Z axis.

Before CNC, Deckels shipped with the vertical head as an otional attachment thusly the ram travel was the Z axis.
Once CNC machines were shipped they designated the vertical axis as the Z.
MAHO remained with the horizontal axis Z designation.
--
Cheers,
Arno
 
Arno,
Basically a power feed on X and Y tables.
Sorry I ws not more specific.
We need to tilt the head 90 deg. from vertical and mount
a carbide jewellers saw 2" OD thus making the machine into a
power fed cold saw.
We slice parts .060 to .500 and so on.
Let me know if you have any leads.
Thanks!
Hugh
 
Hugh,
I'm sorry I don't know of a machine right now.
I just wanted to make sure the axis designation was what you really needed.
--
Cheers,
Arno
 
FP 1 extras

I'm still looking for a slottinghead and a vertical divinghead with tailstock for an FP1, because deckelnut ripped me off on my money and don't want to deliver the already payed slottinghead.
Please help!
 
Wanted- aciera high speed head would trade deckel boring head

I'm still interested in acquiring an aciera f3 high speed head. Will buy outright or trade a deckel boring head.

thanks
Markus
 
I inch stubb arbors with 4 morse taper wanted!!!

Anyone have some extra deckel 1 inch stubb arbors with the 4 morse taper???



thanks
Markus
 
I would like to acquire the "locating fixture for cutter spindle assembly" for the Deckel SO grinder. This fixture replaces the collet holder assembly and permits grinding cutters while mounted in the pantograph spindle. Grinding cutters in the spindle reduces run-out to pratically nothing. The fixture is shown on page 18 of the new SO manual in the Deckel CD.

Jim
 
WTB- Table to fit Deckel FP4NC or FP4M... any type

straight, tilting, universal...
 
WTB - Origonal Wolhaupter UPA3 Boring Bars

Chaps,

I got a Wolhaupter UPA3 a while ago, and I am chasing the original 3/4" boring bars that went with the set. While I should probably buy some indexable carbide tipped bars, I would still like to fill up the empty spaces with the correct parts.

Any out there , or suggestions where I can track them down?

Regards, Steve
 
Misc. parts needed for a FP2NC

I need the following parts;
1. Swarf tray
2. The panel that goes on the rear of the main colum, where the wiring for the coolant pump wiring exits- (missing).
3. The inch rulers for the X & Z axis- (missing).
4. The black plastic cap for the X axis ballscrew- (missing).
5. The housing for the pendent- (mine is broken)
6. Coolant pump & tank

Thanks!
Monte
 
Deckel -Grinding Head & Horizontal Over arm

HI, just buy a Deckel FP2 and i did get some tooling and some accessorie with it.
I have a grinding head for sales or for trade
i have a Horizontal Over arm for sales or for trade..

For trade with a Vertical Spindle head with Long-Range Arm,and other tooling.

Claude,

[email protected]
 
WTB Late model Deckel FP1,FP2 or FP3

Looking for a late model Deckel milling machine-

FP1, FP2 or FP3
Aktive or Dialog a plus.
Open to earlier, manual machines (dial shift/40 taper)-

PM me here on the forum and let me know what you have.

Thanks for looking and thanks for the great forum.

Steve
 
Last edited:
WTB Aciera F4 Indexing Head and Tailstock

WTB Aciera F4 Indexing Head and Tailstock, if anyone has the set please PM me.
Thanks, David
 
Deckel FP1 wanted

I'd like to buy an FP1. I'm not looking to spend a huge amount and an older machine would be fine if in good condition. Especially interested in a unit with vertical head and the compound swivel table but I'd be happy to hear about whatever you have.
 
Small parts for an FP1

Is there a source in the U.S. for Deckel parts or do you have to order them from Germany?
Thanks for any help.


*******
Moderator input:
Steve, you put a post looking for T-bolts in the main section with "Wanted" in the title...which belongs in *this* thread...

Then you put this post...which is a general question in the "Wanted" section, which belongs in the main section.

You are exactly 180 degrees backwards.

If you are looking for something specific, post it in the "Wanted" thread.
If you have a general question about where to get stuff, use the main Deckel forum.

Go ahead and make another post (or two), and I'll delete this.

Don't worry...we'll get there :)

Sean
*****************
 
WTB Deckel XY positioning table- the low profile table as commonly used on the KF12, or something similar. Will consider high quality, low profile table from Advance/Troyke or similar maker.
PM or email me with details.
Thanks
Steve
 
WTB Deckel FP2in Europe

WTB Deckel FP2 with round dials
I buy all over the Europian Community
If anybody knows one for sale I would appriciate if you let me know

Also all Deckels with activ DRO are wanted

Peter from Holland
 
Just how do you " Delete " a post ! on this site !

I'v tryed to find away to delete a Post and Up to now ! Havent found anyway! at all Please tell us all !
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

The Wanted Section

Please be specific and describe the part as well of you can if it is not obvious. Dimensions, catalog photos, placement and purpose will all help those of us with "spare parts" boxes to figure out what it is. List the model and style (ie 2 dial FP-1) and post a photo of the broken part if that is what you have.
Don't assume anyone knows the part you are talking about...assume it is some old lady in another country who is searching through her late husband's spare parts box.

If the part is small, please consider the person's time to find it for you and ship it.

If anyone is successful in obtaining their item, please delete your post or ask me to do it, or edit your post to add "found", giving credit to where you found it.

Good Luck!
Sean
 








 
Back
Top