John in OH
Aluminum
- Joined
- Feb 7, 2002
- Location
- SE Ohio, USA
About 25 years ago I bought a Wells Index 645 "mill in a box" at a high school auction, s/n 645-12090. Since then, the mill has sat in storage but now it's time to put things together!! As I continue to dig through the parts of my Basket 645, it appears that the drawbar and associated top nuts/washers/bearings are missing. The Wells-Index Head Assembly drawing, 9124-A, shows the drawbar but doesn’t provide any part details except that the drawbar is 7/16”-20. I don't have any experience with a WI mill and I can't figure out what the drawbar top parts are as the drawing is short on details.
Can anyone provide dimensions or pics and/or descriptions of the major drawbar components for an R8 taper and the associated drawbar top hardware? Any thoughts or info will be appreciated.
2472-2 Drawbar (R-8 taper spindle; 7/16”-20 thd)
1133 Nut Draw Bar
1482 Washer-Draw Bar
Can anyone provide dimensions or pics and/or descriptions of the major drawbar components for an R8 taper and the associated drawbar top hardware? Any thoughts or info will be appreciated.
2472-2 Drawbar (R-8 taper spindle; 7/16”-20 thd)
1133 Nut Draw Bar
1482 Washer-Draw Bar