Which HRT for 1996 VF-0E

[m_holcross]

I've just picked up an old 1996 Haas VF-0E with the 4th axis amp and wiring installed.
On the plus side amps are for A/C servo's.
Downside is the magnatek gpd 503 drive and not the vector drive.

What is the recommended rotary table size and model for this machine.


Regards,

Mark

 

[countryguy]

You can take a look at this link.
https://www.sterlingmachinery.com/media/brochures1/file/haas-1999-rotary-tables-brochure.pdf

from 99

 

[m_holcross]

Countryguy,

Thanks, that was very helpful.
Clears up which are A/C or DC servo.
Do you know if the DC servo units can be used with the stand alone controller and receive control signals from the VF-0.

Been reading your saga getting your machine going over the last few months waiting for my machine to arrive.

Mark,

 

[countryguy]

Hey Mark,
It's a journey not a sprint for sure! Yes, you can run the DC Rotary units from the AC drives. This post should help - Redirecting to https://www.*******.com/forums/haas-mills/345482-cnc.html

You'll need the kit ( $400 if they still sell it). You'll know by a mount in the bottom w/ a 3x3 transformer sitting on a metal plate usually. the PN is in my post for the kit.

 

[friesen]

@salahi I suggest Google translate and start new thread.