Gordon Heaton
Titanium
- Joined
- Feb 19, 2007
- Location
- St. George, Utah
Thanks for the follow up.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
OK, but didn't you say that "nothing changed" ?Solution found. Programmer error. G41 instead of M41.
How hot did it get in your shop? My machines do crazy things once it starts getting hot. In the summer i sleep in the day and work at night since the shop has no AC.No tool slippage. No change after power down/up.
Manually bring first tool down to the 1.944 section and display says 1.944. Re-qualify tool and the X value in geometry table changed by .001. No wear offset for this tool.
Rerun the finish sequence. Display says X2.00, tool is skimming a smidge off the part at 1.944.
Work shift unchanged.
I hope it turns out to something simple, it usually is but only after you figure it out. ;-)Able to spend a few minutes with the machine this afternoon. Touched off part with 4 tools and they all read some .056 smaller than actual size.
Temp is 114 F, Looks like I'll qualify 11 tools Monday morning and see what happens.
Notice
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.