Hello Everybody,
My name is Robert. I am currently setting up my shop and I am needing help with my CNC lathe I have not substantially operated.
As the title states, it is a Yang SML-20 with a FANUC OT-D controller.
I am using Fusion 360 CAD/CAM and also the G-wizard G-code editor.
I am only basically beginning familiarity with lathe insert tools.
I have not programmed for a CNC lathe.
I have programmed for the Tormach 1100M (VMC) and Matsuura MC-760V2 (VMC) with Yasnac MX-1 controller.
I have only briefly operated this Yang SML-20 for a few hours several years ago when it belonged to another shop. I did not do any set-up, or programming for it and I could use the help of someone more familiar with it.
I currently need to set-up the air system to the machine, check and clear errors, grease the turret and anything else to be done to set-up and run for production.
Thank you guys for the help!
My name is Robert. I am currently setting up my shop and I am needing help with my CNC lathe I have not substantially operated.
As the title states, it is a Yang SML-20 with a FANUC OT-D controller.
I am using Fusion 360 CAD/CAM and also the G-wizard G-code editor.
I am only basically beginning familiarity with lathe insert tools.
I have not programmed for a CNC lathe.
I have programmed for the Tormach 1100M (VMC) and Matsuura MC-760V2 (VMC) with Yasnac MX-1 controller.
I have only briefly operated this Yang SML-20 for a few hours several years ago when it belonged to another shop. I did not do any set-up, or programming for it and I could use the help of someone more familiar with it.
I currently need to set-up the air system to the machine, check and clear errors, grease the turret and anything else to be done to set-up and run for production.
Thank you guys for the help!