Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
charlieman22's latest activity
-
Ccharlieman22 reacted to rke[pler's post in the thread Resurrecting 1960 10EE with 460V Sabina drive with
Like.
You won't know what you need until you open it and see. Sometimes I get the bigger stuff and unwind it for the size I need. For... -
Ccharlieman22 reacted to daryl bane's post in the thread Resurrecting 1960 10EE with 460V Sabina drive with Like.
For some reason, I remember putting a lipped seal there. On the parts diagram, there is a part# 548-2, which looks to be a seal of some...
-
Ccharlieman22 reacted to Rob F.'s post in the thread Resurrecting 1960 10EE with 460V Sabina drive with Like.
Mcmaster should have all kinds of packing material buy, it per foot IIRC.
-
Ccharlieman22 replied to the thread Resurrecting 1960 10EE with 460V Sabina drive.Thanks Russ. I can make hay with that. Will see if YouTube has anyone "packing" an opening as well. Should be able to figure out the...
-
Ccharlieman22 replied to the thread Resurrecting 1960 10EE with 460V Sabina drive.Just the sort of insights I was looking for. Is this the sort of thing you mean? I have no experience with this type of “packing” -...
-
-
Ccharlieman22 reacted to Cal Haines's post in the thread Resurrecting 1960 10EE with 460V Sabina drive with Like.
Read through gernoff's square-dial gearbox rebuild thread, see what he used (or send him a message)...
-
Ccharlieman22 replied to the thread Resurrecting 1960 10EE with 460V Sabina drive.Follow up question regarding gear box shaft seals at handles. When I removed the handles - it created some leakage at front of gear box...
-
-
Ccharlieman22 reacted to Cal Haines's post in the thread Resurrecting 1960 10EE with 460V Sabina drive with Like.
That gear is on the end of the threading output shaft of the headstock. It sticks into the back side of the end-gear housing. You won't...
-
Ccharlieman22 replied to the thread Resurrecting 1960 10EE with 460V Sabina drive.Thanks Cal. Just couldn’t get my mind around why that one gear had to get removed. Was evident the moment I removed the gear and felt...
-
-
Ccharlieman22 replied to the thread Resurrecting 1960 10EE with 460V Sabina drive.Have had my machine re-assembled but not fully repainted for the last few months. Needed it for other projects - and I've gotten pretty...
-
-
Ccharlieman22 reacted to Cal Haines's post in the thread 10EE square-dial apron oil system with Like.
Yes, that hole is part of the lubrication for the half-nut. There is a matching hole in the upper half-nut that is bored through to the...
-
Ccharlieman22 replied to the thread 10EE square-dial apron oil system.Cal - thanks for posting the cross section. The apron will come off again when I paint the lathe body. I’ve been cycling it on and off...
-
Ccharlieman22 replied to the thread 10EE square-dial apron oil system.Daryl, I believe that allen bolt you have in there belongs to the top left ear of the worm gear cover. Perhaps you just screwed it back...
-
-
Ccharlieman22 replied to the thread 10EE square-dial apron oil system.Everything in TGTs post aligns with mine. Bolts (if long enough ones used) likely go right into that passage. Dave’s hydraulic thread...
-
CAm mid restore on my 10EE. Have had the apron on and off a handful of times as I work to get everything nicely fit and oil system...
-
