FS D1-4 and L00 4 jaw chucks

[JBishop]

Have too many chucks, need to thin the herd. First is a Pratt Bernerd 8" 4 jaw, D1-4 direct mount. This is a top quality chuck with what PB calls a super precision steel body and hardened jaws. Made in England. Real nice shape, appears to have seen little use, works smoothly, sharp serrations, reversible jaws are snug in the body, no play. Came to me without a key, 3/8" hex, I am including a 3/8" allen wrench which could be used to fab a key. Note this chuck could be used like a plain back chuck by removing the cam lock pins and bolting to a back plate. $350. plus shipping (heavily reinforced flat rate box likely the best)

Also have a 10" (actually 10-1/4", 260 MM) 4 jaw, direct L00 mount which makes it shorter and lighter than a chuck with a separate back plate. Excellent condition, appears to have seen little use, sharp serrations on the reversible jaws which are snug in the body, no play. Made in Italy. Came to me without a key, found the one shown in my stash, will include it, chuck is so nice it probably deserves a nicer one though. $250. plus shipping, again think a large flat rate box, heavily reinforced should work.

Thank you, Jim Bishop PM, email [email protected], or ph. 774-696-059nine

 

[JBishop]

Have too many chucks, need to thin the herd. First is a Pratt Bernerd 8" 4 jaw, D1-4 direct mount. This is a top quality chuck with what PB calls a super precision steel body and hardened jaws. Made in England. Real nice shape, appears to have seen little use, works smoothly, sharp serrations, reversible jaws are snug in the body, no play. Came to me without a key, 3/8" hex, I am including a 3/8" allen wrench which could be used to fab a key. Note this chuck could be used like a plain back chuck by removing the cam lock pins and bolting to a back plate. $350. plus shipping (heavily reinforced flat rate box likely the best)

Also have a 10" (actually 10-1/4", 260 MM) 4 jaw, direct L00 mount which makes it shorter and lighter than a chuck with a separate back plate. Excellent condition, appears to have seen little use, sharp serrations on the reversible jaws which are snug in the body, no play. Made in Italy. Came to me without a key, found the one shown in my stash, will include it, chuck is so nice it probably deserves a nicer one though. $250. plus shipping, again think a large flat rate box, heavily reinforced should work.

Thank you, Jim Bishop PM, email [email protected], or ph. 774-696-059nine

Couple more pics of the 10" chuck.

 

[JBishop]

Pratt Burnerd chuck is sold, thank you.