FS: Go/ no-go gages - metric, SAE, Torx, hex and plain

[mattthemuppet]

New haul came in on Friday. I have lots of extra length gage pins, thickness gages and depth/length gages to sort through too, so those will be going up soon.

SAE
12-28, 1/4-28, 5/16-18+24, 3/8-24+gage, 7/16-20, 1/2-13, 5/8-18 and 11/16-16. $30

5/16-24, 3/8-24 (one with gage, one without), 5/8-18. $10 each bag

 

[mattthemuppet]

Metric

16*2, 16*1.5, 14*2+1.5, 12*1.75(+gage)+1.5+1.25, 10*1.5+1.25, 8*1.25, 6*1. $50

14*2+1.5, 12*1.75+1.5+1.25, 10*1.5+1.25. $25

14*2+1.5, 12*1.75+1.5, 10*1.5+1.25. $20 each bag

14*2+1.5, 10*1.25 $10

 

[mattthemuppet]

Torx

Four bags of T50, 45 and 40, $10 each bag

Two Torx 12 (?) plus spare. One of the gages days "broach bit", not sure what to make if that. $10 the lot

Spare gubbins and a new in bag 7.56mm gage pin $5

Spare Torx T40 gages, $2ea

 

[mattthemuppet]

Assorted plain metric gages, see pics for sizes

$20 the lot


$15 the lot

 

[mattthemuppet]

6mm hex gages, different tolerances

6.02/ 6.095 (one)
6.03/ 6.195 (two).
All still in wax with NIST certificates. $10 each

Bunch of 6.03/ 6.20 and one 6.03/ 6.195. $5ea for the ones in boxes, $3ea for the ones that aren't

6.02 Hex/ 6.095 slot, $2ea

 

[mattthemuppet]

1/2-20 go/ no-go OD gage set $20

Two M10x1.50 no-go OD gages, $5ea

 

[mattthemuppet]

Just found another OD thread gage, a 9/16-18 go, $5

And some other random stuff. Big bar is 25.14092/ 25.17902mm(!), smaller one is 11.41476/ 11.42746mm, 10mm hex od and the single end one is 1.934" best as I can measure it. $10 for the lot

 

[moonlight machine]

New haul came in on Friday. I have lots of extra length gage pins, thickness gages and depth/length gages to sort through too, so those will be going up soon.

SAE
12-28, 1/4-28, 5/16-18+24, 3/8-24+gage, 7/16-20, 1/2-13, 5/8-18 and 11/16-16. $30
View attachment 414819
5/16-24, 3/8-24 (one with gage, one without), 5/8-18. $10 each bagView attachment 414820View attachment 414821

I'll have the first photo for 30.00

 

[mattthemuppet]

And found an M10*1.5 OD go gage, $5

 

[TheOldCar]

I would like the $50 metric set. If you can possible clone the $30 set moonlight machine is getting, I’ll take one of those also.

EDIT: also add the OD M10x1.5 go/no go please!

 

[mattthemuppet]

The first two SAE and the first Metric thread gage sets, plus one each of the M10 go/no-go OD gages have sold, thanks!

 

[TheOldCar]

Got my order yesterday, thanks for the perfect transaction.

 

[moonlight machine]

I'll have the first photo for 30.00

Got everything, great packing, good stuff at a good price.

 

[mattthemuppet]

Thanks all!