n2ihp
Plastic
- Joined
- Nov 5, 2002
- Location
- Winooski, Vt. 05404
I am closing my long time side business and the two listed lathes are excess to my current needs. I can be reached at 802-488-5181 or [email protected]. The lathes are currently under power in Winooski, VT. Leave a message if I don't answer, I will return all calls.
Omniturn GT-75 2-axis gang style lathe $12,000
-currently under power wired for 220 single phase but can be changed back to 3 phase
-Latest controller (G4) and spindle encoder
-recently replaced axis motors
-Omni 300/400/600/800 toolholders
-LG multi tool holder and inserts
-bar puller
-Omnitiurn tap holder and collets
-shop made spindle liners (3 sizes)
-Front panel was made by prior owner, original front panel is included
-manual
-a few misc. other items
Feeler FT-27 turret lathe $3,000
-220 3 phase
-double tool cross slide w/tool holders
-6 position turret for 5/8" tools
-3jaw chuck
-4 jaw chuck
-overhead cut-off attachment
-Hardinge compound cross slide
-Hardinge tailstock
-fixed tool holders
-adj. turning tools
-fine adj. turning tool
-adj. hollow mills
-Hardinge tap holder and collets
-tool extensions
-Rubometric 9/16 die head and dies
-Geometric 5/16 die head and dies
-manual
-a few misc. other items
Omniturn GT-75 2-axis gang style lathe $12,000
-currently under power wired for 220 single phase but can be changed back to 3 phase
-Latest controller (G4) and spindle encoder
-recently replaced axis motors
-Omni 300/400/600/800 toolholders
-LG multi tool holder and inserts
-bar puller
-Omnitiurn tap holder and collets
-shop made spindle liners (3 sizes)
-Front panel was made by prior owner, original front panel is included
-manual
-a few misc. other items
Feeler FT-27 turret lathe $3,000
-220 3 phase
-double tool cross slide w/tool holders
-6 position turret for 5/8" tools
-3jaw chuck
-4 jaw chuck
-overhead cut-off attachment
-Hardinge compound cross slide
-Hardinge tailstock
-fixed tool holders
-adj. turning tools
-fine adj. turning tool
-adj. hollow mills
-Hardinge tap holder and collets
-tool extensions
-Rubometric 9/16 die head and dies
-Geometric 5/16 die head and dies
-manual
-a few misc. other items