Mid 80's Act3 has a non-Fanuc PLC inside control cabinet. It has a keypad connected to it, located behind the CRT console. Lost battery power, lost memory. I have profound manuals and paperwork for this machine, but nothing about this PLC.
It wouldn't surprise me if an Okuma-Howa Act3 with a 6T or 10T Fanuc used the same PLC.
If anyone has one of these machines and is willing to offer some help or can point me in the direction of anyone who might have the parameters or even just the procedure to enter them, anything would be helpful.
Thanks!
It wouldn't surprise me if an Okuma-Howa Act3 with a 6T or 10T Fanuc used the same PLC.
If anyone has one of these machines and is willing to offer some help or can point me in the direction of anyone who might have the parameters or even just the procedure to enter them, anything would be helpful.
Thanks!