Anyone know what signal the 3rd wire on the fan is supposed to show to keep the control from fan overheat alarming?
One of the two 60 X 60 X 15mm cooling fans on the back of the LCD mounted control on my Mori lathe, has given me trouble since day one. Finally quit a couple days ago, and all the...
As the title says, my mid/late 90's Mori Seiki SV50 just dropped a 916 bomb on me. I have Parameter backups but have never inserted a card into the slot to back up whatever is available there. LED's on Main Control say RAM Parity error on Main CPU.
I read to Restart with RESET and DELETE held...
Here's what I'm working with. Part is 1 X 5". Datum about 1" square. These are all Z axis Tolerances.
I'm a little uncertain if I'm handling this correctly. I have some hundreds to do so need something quick and easy.
1) Right now I'm holding the Datum against a let's call it perfectly flat...
My collection of clogged and worn out non woven belts is getting out of hand. I have to do a fair amount of straight line finishing on aluminum parts and use these belts on either a 4 X 36 or 6 X 48 belt sander. As everyone knows, the belts are expensive and really don't last that long. I've...
After an MPG Handle install I lost the Operators Panel that Mori Supplied on this SV-50. This happened while moving some wires around with power on. Error EX099 Panel Error. (No other info) No Lights. No Function.
The MDI and Screen are fine, and the machine comes all the way up to Servos on...
First time having the machine running after new D-Cell battery packs and a nearly finished 2nd Handle Install. Evey single Button and Function on the control/machine works still except the RESET button. Much too important to let this go. Programs will still run in Auto but not stoppable with...
My question first... does anyone else have experience leading them to think that Black Delrin 150 off gasses Formaldehyde a lot more then a standard copolymer Acetal? I've machined a lot of Natural Acetal, (little black) and even though there is the occasional faint funky smell after say heavy...
I'm swapping out my Standard Keypad MDI Unit for a Full Keypad unit. I want to be able to program GoProbe Probing cycles at the control in MDI, instead of having to make little programs offline and copy them over or let sit resident hogging up space.
In doing so I need to set Parameter 38.3 to...
I've managed a mostly working legacy Renishaw Probe System on a mid 90's YCM Supermax 3 w/Fanuc OM-C control. I've got Macro B w/Extended Variables.
I don't yet have the extended keyboard so I can do very little in MDI. I've calibrated and run simple Inspection Plus routines successfully. But...
I've finally got my legacy Renishaw Spindle Probe installation done on a mid 90's YCM Supermax 3 with OMC. This machine has always bugged me in that it won't move in G1 without spindle rotation. Obviously, in order to probe, I need to figure out how to get past that.
Issues:
Reduction Gearbox...
I'm installing a Renishaw Legacy probing setup on a mid 90's YCM Supermax 3.
MP10 Probe - OMM - MI12 / TS27R Tool Setter - HSI Interface
The machines' ancillary systems seem to be using 24VDC supplied from a backpane connection off the Control Power Supply. The first appearance of a 24VDC line...
The short version of what I asked earlier... I read everything on this forum about live tools and none seemed to answer this question with clarity.
Z axis live tool.
Which is correct... if any?
Sparse?
Full? (For clarity... the grease I'm holding came out of that live tool pictured. You...
I just finished rebuilding a couple KSC branded Z axis two side live tools for my Mori. After running them in, I took the cover off an identical unit that I have to see what a guy could see, and found the spiral bevel gear cavity completely topped off with grease. (This one I had bought off...
Looked around for info on this, but haven't found anything that directly answers my questions.
Trying to fit a rotary table to a mid/late 90's Mori VMC with Fanuc 18MC control. My Servo drives are all A06B-6079 type. Typical Alpha Series drives of the era.
Many of the used tables come with...
As the title says. Looking for pallets and chip conveyors designed for the pallet version of an SV50 or SV500 or SV503, which I think area all nearly the same.
Wondering if anyone is, sadly, parting one of these out.
I have detail drawings, but here is a couple pictures to start with. I would...
Need Help on Face Roughing Strategy
Can anyone tell me what type of tool and insert combination they'd use on just the face of this aluminum part? Also perhaps what cycle? I can put a 44mm drilled hole down the middle to start. Kind of new to lathe programming. Especially face work like this...
2000 Mori SL200-SMC Fanuc 18i (Mori MSC-501)
I've asked about this problem previously and have waited to visit it again until it happened again. Today on a different program the problem re-visited.
The problem is when running in Memory Mode, at some point in a program the tool change will get...
I'm still having this problem where in every production program, at some point the turret will hang up after unclamping. I've trouble shot far enough to know that all the signals are correct for the unclamped state. The buffer displays MEM-STRT-MTN-FIN. To me that says the turret servo has been...
Anyone know how to shift home position on a C axis built-in motor lathe main and sub spindle?
2000 Fanuc 18i-TA Control. (Mori MSC-501)
The dirt...
This hex threading job I sought threading info on earlier has forced another situation I'm unfamiliar with. Being as it's hex stock I need to use...
Got my first CNC theading job coming up this week. 60 parts out of 4140 annealed 1 1/4 hex. Roughly 6" long with an ID thread of M22 X 1.5 Left Hand. The customer is looking for at least 2" of usable thread on this ID.
Question 1: What bar to use?
Steel Thru Coolant Bars - (Not enough money in...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.