Deckel NC prices have officially reached negative/zero territory in Germany

[Martin P]

yes, this is d11 and d12 and this is just the list for each axis. xx stands for axis number.

 

[Colt45]

That there are parameters is interesting. On my D4 the switch and cam are not adjustable. They get it close then I align the table slots by rotating the body of the encoder located on the end of the worm, DD said that is the way. It could easily be completely different from yours, it's an FP7NC.

Perhaps I didn't describe that correctly, haven't been in there for a long time (it's super reliable, very accurate and just works great).

Basically you slip the cam or slip the encoder after you get the t-slot(s) physically aligned where you want it (as described by Mud). IIRC, theoretically, you could set the table at some oddball angle like 27.5 degrees or 45 or whatever if you had a reason (like a production set up on a machine dedicated to a certain task) wanted and have that angle be where it referenced to.
Can look up my notes on it if anyone needs better details or help.

The NCT table on my FP4NC D4 was made by Fibro, I think there were Eimeldingen produced tables also- do you know who made the FP7 tables?

 

[Mud]

do you know who made the FP7 tables?

I'd guess SHW, because they made the rest of the machine.