For Sale Powermatic 1150 Drill Press Spindle Assembly NOS #2640018

[wordsmith07]

I have a new discontinued complete spindle assembly for PM 1550 drill press. These were priced at $280 several years ago when production ceased. Willing to take $250 plus shipping. Includes quill, spindle, bearings, collars, key and setscrews. Also shows inspection report of run-out at production. Free pick up in Athens, AL
Note cosmoline coating on parts.

 

[wmachining]

How many teeth in the spline of the spindle?

 

[wordsmith07]

How many teeth in the spline of the spindle?

Sorry, I'll count tomorrow and respond

 

[wordsmith07]

Sorry, I'll count tomorrow and respond

Again, sorry for poor photo (reason I didn't upload earlier.) By counting spaces in Drive Shaft there are 10 splines.

 

[wmachining]

Is the spindle roughly 19-20 in. If so then I would like to buy both the spindle assembly and the spline drive.

 

[wordsmith07]

Okay here is what I know. The spindle pictured with the tape measure matches the bearings in the quill. The journals where the bearings ride are 20mm. the bearings in the quill are 6004 and 6204 as shown. The quill, spindle, spline drive AND the quill drive shaft with collar with three tapped holes for the handles were in the kit. Unsure if they were part of the original kit.
I also have another spindle but the journals are .750 which would require a 6204 3/4 bearing that has .750 ID but 47mm OD to match quill. I didn't see a 6004 3/4 bearing with a 42mm OD that would match the quill I have.
So I want to sell the spindle, quill, spline drive with small collar as a unit (matched and checked with runout as shown on spec sheet) for $200 and the quill drive with collar for $50. The second spindle with .750 bearing journals I will sell for $75.
Shipping will be actual FEDEX or UPS costs. Will not ship USPS due to lost items (4) in last year.

 

[wordsmith07]

Here is quill drive and second spindle. thought i would separate photos for clarity. Both spindles are MT and about 20 5/8 long .. These are longer than the JT drives that hold a chuck.
The black lines in last pic point to quill drive and collar I am referring to.

 

[wmachining]

How would I buy it from you? It's my first time on forums and I dont know how to do much.

 

[wordsmith07]

Pm me we can swap. Phone numbers

 

[wordsmith07]

I have a new discontinued complete spindle assembly for PM 1550 drill press. These were priced at $280 several years ago when production ceased. Willing to take $250 plus shipping. Includes quill, spindle, bearings, collars, key and setscrews. Also shows inspection report of run-out at production. Free pick up in Athens, AL
Note cosmoline coating on parts.

Note:: Sold Sold Sold