Sam Salvati
Plastic
- Joined
- Jun 1, 2009
- Location
- Yulan, NY
Hardinge HSL-59 "simple operation lathe" also known as a second operation lathe. Good for knurling, beveling, profile cutting, facing. It has a 9" swing, 1 1/16" collet capacity with a mostly there collet set, spindle speeds to 3000 rpm, cross slide travel 3", 3ph motor. Has tool holder with parting tool and speed cross slide. Comes with drill chuck and adapter to fit the headstock. No table. All there just needs to be wired with a plug and set to go. Pictures in a bit. Asking 1500$ OBO.
Located in Maryland, can deliver in the state for a little extra.
[email protected]
Located in Maryland, can deliver in the state for a little extra.
[email protected]
Last edited: