edl
Aluminum
- Joined
- Apr 8, 2008
- Location
- Southeast USA
Long shot, I know, but does anyone know a source for an old (or new equivalent) roller pump from Hypro out of MN (now owned by Pentair ... they were no help)
Back in the day it was their model 612 ... it was used as a pulley drive pump to run coolant on a Doall C-8 bandsaw -- we have the saw, pump is missing,,,know we can work around it, but just wondered if something stock-ish was out there?
Attached is the drawing of the pump from Doall -- also attached is a catalog page and it looks like the 2nd from right on bottom row (showing an 812...we need a 612 (looks like it has an extra bearing/oiler?
Many thanks!
Back in the day it was their model 612 ... it was used as a pulley drive pump to run coolant on a Doall C-8 bandsaw -- we have the saw, pump is missing,,,know we can work around it, but just wondered if something stock-ish was out there?
Attached is the drawing of the pump from Doall -- also attached is a catalog page and it looks like the 2nd from right on bottom row (showing an 812...we need a 612 (looks like it has an extra bearing/oiler?
Many thanks!