jimybuddiesel
Plastic
- Joined
- Jul 20, 2015
Would I be able to hook this feeder to my Thermal Arc? The thermal arc can supply the 115 volts to power the feeder, but I was not sure about the contactor connection voltage.
looks like the feeder contactor control voltage is 115v between pins 2 and 4 of the Miller wire feed, but on the thermal arc pin A and B are +15V.
The first attachment is from the Miller S52E manual, the second from the ULTRAFLEX
last two photographs are of the schematic of the Miller wire feeder
looks like the feeder contactor control voltage is 115v between pins 2 and 4 of the Miller wire feed, but on the thermal arc pin A and B are +15V.
The first attachment is from the Miller S52E manual, the second from the ULTRAFLEX
last two photographs are of the schematic of the Miller wire feeder
