Luke
Hot Rolled
- Joined
- Aug 23, 2003
- Location
- Nevada,Iowa
The handle on my Aloris locks at about 1 o'clock and this is quite annoying. My understanding is it should be about 5 o'clock. Is there an adjustment that can be made?
Luke
Luke
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks for the info. This afternoon, I will disassemble and give this a try.
Make a tool. It has to fit that "screw driver" slot tight as hell, plus have enough metal on it to get a hold of with a big wrench ...
Hey Muddstopper, before this post gets too old again, I was wondering if you had any luck fixing your problem with this aloris tool post / holder? I'm having the same problem. I end up having to unscrew and remove the handle out of the way just to remove or install the holder.Old thread I know, but I am having the same issue. I have a aloris bxa tool post and am using aloris tool holders. My problem is trying to clock the handle so it doesnt interfer with removing the tool holder. It is about 90* out. It works just fine for one side installing the holder, but the handle piviots just over the corner of the other side making it had to install the other holder. I have completely disassembled the holder and gave a good cleaning and oiling. I have clocked the wedges every way from sunday and it still isnt to my liking. If I clock it to where the handle doesnt interfere with either holder side, it then sticks out over the work to release or it sticks out in the direction of the travel. The holder works fine, its just the handle direction is wrong.
Without getting too personal, can I ask how that works out for you ?I put some mobile 1 oil on my parts to keep them slick.
Without getting too personal, can I ask how that works out for you ?
Notice
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.