Few weeks back i posted the issue regarding our doosan 5700 whose 4th axis microswitches shorted out because of coolant flooding inside the microswitch chamber.
So i got the electric diagram and multimeter and tested the power supplies , relays etc...
I even disconnected the entire 4thaxis hydraulics electrical and all from the machine .
Still im getting operator alarms, some are for things that the machine dont even have.
Magazine door alrm(never had one)
Spindle lube alarm
Spindle air pressure alarm
The machine uses an oil cooler . It has power and shows no alarms but it doesnt do anything.
The fanuc io units also dont show any alrms.
Any other suggestions or a way to reset these alarms?
So i got the electric diagram and multimeter and tested the power supplies , relays etc...
I even disconnected the entire 4thaxis hydraulics electrical and all from the machine .
Still im getting operator alarms, some are for things that the machine dont even have.
Magazine door alrm(never had one)
Spindle lube alarm
Spindle air pressure alarm
The machine uses an oil cooler . It has power and shows no alarms but it doesnt do anything.
The fanuc io units also dont show any alrms.
Any other suggestions or a way to reset these alarms?