Joshua Lee
Plastic
- Joined
- Mar 11, 2021
Hello Everyone
I bought a RT160 4th-axis rotary table for my Fanuc oi-mc machine, and 4th-axis amplifier is: A06B-6130-H002, the multiservo amplifier is A06B-6134-H302#A, and my 4th-axis motor is Fanuc alpha 2. Before I post it for help, what I did are:
1, I did contact with the MTB, but they did not respond.
2, I also contacted with the rotary table builder, but they will charge the flight hotel and travelling hours plus other fees, which I can't afford it.
3, I emailed to Fanuc America for help, only received an 'Special Notice' email, which is no useful.
So, I decided to install the 4th-axis myself, but the first challenge is how to connect the multiservo to the slave servo with fiber optic cable, because the multiservo doesn't have a output COP10A connector.
Your help will be highly appreciated!
Best wishes,
Joshua
I bought a RT160 4th-axis rotary table for my Fanuc oi-mc machine, and 4th-axis amplifier is: A06B-6130-H002, the multiservo amplifier is A06B-6134-H302#A, and my 4th-axis motor is Fanuc alpha 2. Before I post it for help, what I did are:
1, I did contact with the MTB, but they did not respond.
2, I also contacted with the rotary table builder, but they will charge the flight hotel and travelling hours plus other fees, which I can't afford it.
3, I emailed to Fanuc America for help, only received an 'Special Notice' email, which is no useful.
So, I decided to install the 4th-axis myself, but the first challenge is how to connect the multiservo to the slave servo with fiber optic cable, because the multiservo doesn't have a output COP10A connector.
Your help will be highly appreciated!
Best wishes,
Joshua