nightsky84
Aluminum
- Joined
- Nov 26, 2019
Whenever we had the 4th axis set up originally we had to zero return it before we could use it by jogging it a little and returning it. Worked great. Here recently wherever we jog it to when we go to zero return it moves about 2 degrees and stops and resets every position to 0....relative, absolute, and machine coords....I'm not sure how to get it to remember it's position. It changes each time we start the machine up and does the same thing over and over again. Never the same 0 position. Any help would be appreciated. I've tried messing with the 1815 parameters and changing the reference points but nothing works still having issues.
