Winsten
Plastic
- Joined
- Aug 29, 2020
We have a FEMCO lathe with a directional hydraulic control valve that went bad. The machine had sat for a while. The valve drove the turret rotation hydraulic motor.
This valve (Daikin JS-G01-4CA-12) appears to have both solenoid coils on the right hand side… is there a name for this configuration of double stacked coils? And is there a way to get them that don’t cost an absolute arm and a leg?
Direct replacement looking like $900-$1600. This machine is pretty beat up, but we just revived the servo drive so I’d like to get it running again, but without investing too much more. Going to disassemble the valve and coils and check the whole thing.
Any insight would be great.
This valve (Daikin JS-G01-4CA-12) appears to have both solenoid coils on the right hand side… is there a name for this configuration of double stacked coils? And is there a way to get them that don’t cost an absolute arm and a leg?
Direct replacement looking like $900-$1600. This machine is pretty beat up, but we just revived the servo drive so I’d like to get it running again, but without investing too much more. Going to disassemble the valve and coils and check the whole thing.
Any insight would be great.