No, but I did collect a lot of parts to build one, all still back at the yard in SM, maybe some day I'll revisit that project, maybe. My plan was to mount a triple stage forklift mast on the back of a truck, with hyd rams to lay it down in transport. For drill stem I was going to use real drill stem, but cut and rewelded in 8' maybe 10' lengths, the leftovers would be used for fence posts. I did drill 2 starter holes, one by warehouse, another by house, I forget 10' maybe 12' deep, sleeved with 12" pvc. From the people I talked to, all said it would most likely not be potable due to ag chemicals and septic systems in the area, my main concern was water for warehouse so we could have a sink and flush toilet, not to drink. Warehouse is rented, tenant pays the water bill, and within the next 10 years it will all be bulldozed for a strip center,mall, who knows what, so I'm not worried about it anymore.
Some of the small rigs use npt threaded pipe, might be ok in sand, your mileage may vary in Houston black gumbo clay, or gravel if you can hit it.